Aeroquip® by Danfoss

Eaton's FD90 Series diagnostic coupling is designed to connect and disconnect pressure gauges to hydraulic systems, eliminating the need for permanent gauges. The maximum operating pressure is 7000 psi.

Aeroquip® by Danfoss Hansen™ and Gromelle™ Diagnostic Coupling, Series: FD90 Series, Coupling Fitting, 1/4 in Connection Size 1, Male Connection Type 1, 3/8 in Connection Size 2, Male SAE O-ring Connection Type 2, Male |Male SAE ORB Connection, Carbon Steel, Steel Material Construction, Zinc Trivalent-Plated, 3/8-24 Thread, 0.62 in Hex, SAE J1502 Dimension Standards, 1.52 in L, 7000 psi Maximum Operating Pressure, Additional Information: Buna-N Seal

Additional Information	:	Buna-N Seal
Connection Size 1	:	1/4 in
Connection Size 2	:	3/8 in
Connection Type	:	Male |Male SAE ORB
Connection Type 1	:	Male
Connection Type 2	:	Male SAE O-ring
Dimension Standards	:	SAE J1502
Dimensions	:	1.52 in L
Finish	:	Zinc Trivalent-Plated
Fitting Type	:	Coupling
Hex Size	:	0.62 in
Material	:	Carbon Steel
Material Construction	:	Steel
Maximum Operating Pressure	:	7000 psi
Series	:	FD90 Series
Thread Size	:	3/8-24

Automatic sleeve for one hand push-to-connect operation|Flush face valving provides minimal fluid loss and low air inclusion|Self-sealing valve design allows connection and disconnection at 500 psi|Broad range of end configurations for system accessibility|Standard O-ring and back up ring - field replaceable seal kits|Diagnostic pressure testing for hydraulic systems

• Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Danfoss_FD9010040304_Catalog.pdf