3% Off All Online Orders Over $100
Dixon® H5282L-A H5282L-A

Dixon® 520-H Brass Quick Disconnect x MNPT Permanently Attached Petroleum Coupling

Dixon® 520-H Permanently Attached Petroleum Coupling, Hose X NPT, Brass

  • ARGPN: H5282L-A loading
    • Connection Size 1:
    • Connection Size 2:
  • Add to cart
    Add To Favorites
    • pin-int

    Dixon® Permanently Attached Petroleum Coupling, Series: 520-H, Connection Type 1: Hose, Connection Size 1: 4 in, Connection Type 2: NPT, Gender 2: Male, Connection Size 2: 4 in, Material Construction: Brass, 5-1/2 in Diameter, 6-1/32 in Length

    California residents see Prop 65 WARNINGS

    Connection Size 1      :      4 in
    Connection Size 2      :      4 in
    Connection Type 1      :      Hose
    Connection Type 2      :      NPT
    Diameter      :      5-1/2 in
    Gender 2      :      Male
    Length      :      6-1/32 in
    Material      :      Brass
    Material Construction      :      Brass
    Series      :      520-H
    Shape      :      Coupling
    • Male has octagonal facets for tightening with a wrench
    • The stem is expanded to nominal ID of hose for a rigid, uniform, full-flow area
    • Couplings are pre-lubricated for assembly
    • Stems are machined from bar stock or solid brass forgings
    • Designed for internal expansion only

    Safety Notes: Do not interchange with other manufacturer's fittings.

  • Designed for internal expansion only.
  • Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.
  • Do not use a wrench or vice on ferrule.
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
  • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.
  • Consult Dixon® for recommendations on usage.
  • Strict adherence to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance.
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
  • Media being transported through the hose should be compatible with the stem material.
  • Compatibility of ferrule material with the environment in which it will be used is recommended.
  • Consult the Compatibility Chart or the Dixon® factory for material compatibility.
  • For applications other than the ones list, please consult Dixon®.

    Applications: For discharge and suction service and commonly used in the transfer of fuel to homes, airplanes, ships

    • Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_10WSDPA_CAT.pdf
    • Cut Sheet https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_H5282LA_SS.pdf
    • Technical Drawing/Parts Diagram https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_H5282LA_TD.pdf

    Complete Your Assembly