3% Off All Online Orders Over $100
Dixon® R1BS-A R1BS-A

Dixon® R1BS-A

Dixon® Holedall™ 520-H Brass Ferrule, 1 in, 1-33/64 to 1-35/64 in OD

  • Manufacturer: Dixon Valve & Coupling Company, LLC
  • Brand: Dixon®
  • ARGPN: R1BS-A
  • MPN: R1BS-A
  • ARG Industrial Available for Pickup - Anchorage, AK Branch: loading Click here
  • ARG Industrial Available for Shipping: loading
  • Available for Dixon Valve & Coupling Company, LLC factory-direct delivery: loading
  • loading
  • Add to cart
    Add To Favorites
pin-int

Dixon® Holedall™ Ferrule, Series: 520-H, Nominal Size: 1 in, 1-33/64 - 1-35/64 in OD, 1-1/8 in Length, Material Construction: Brass, For Use With: Scovill Style Internally Expanding Permanent Couplings

California residents see Prop 65 WARNINGS

For Use With      :      Scovill Style Internally Expanding Permanent Couplings
Length      :      1-1/8 in
Material      :      Brass
Material Construction      :      Brass
Nominal Size      :      1 in
Outside Diameter      :      1-33/64 - 1-35/64 in
Series      :      520-H
Shape      :      Ferrule
Sub Brand      :      Holedall™
Applications: For discharge and suction service, transfer of fuel to airplanes, homes, ships and moreSafety Notes: Do not interchange with other manufacturer's fittings.Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.Do not use a wrench or vice on ferrule.Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.Consult Dixon® for recommendations on usage.Strict adherence to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance.Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.Media being transported through the hose should be compatible with the stem material.Compatibility of ferrule material with the environment in which it will be used is recommended.Consult the Compatibility Chart or the Dixon® factory for material compatibility.
  • Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_1020304C_CAT.pdf
  • Cut Sheet https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_R15AAASA_SS.pdf
  • Technical Drawing/Parts Diagram https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_R15BS-A_TD.pdf

Complete Your Assembly