3% Off All Online Orders Over $100
Dixon® R15BS-A R15BS-A

Dixon® Holedall™ 520-H Brass Ferrule

Dixon® Holedall™ 520-H Ferrule, Brass

  • Add to cart
    Add To Favorites
    • pin-int

    Dixon® Holedall™ Ferrule, Series: 520-H, Nominal Size: 1-1/2 in, 2-3/64 - 2-6/64 in OD, 1-7/16 in Length, Material Construction: Brass, For Use With: Scovill Style Internally Expanding Permanent Couplings

    California residents see Prop 65 WARNINGS

    For Use With      :      Scovill Style Internally Expanding Permanent Couplings
    Length      :      1-7/16 in
    Material      :      Brass
    Material Construction      :      Brass
    Nominal Size      :      1-1/2 in
    Outside Diameter      :      2-3/64 - 2-6/64 in
    Series      :      520-H
    Shape      :      Ferrule
    Sub Brand      :      Holedall™

    Applications: For discharge and suction service, transfer of fuel to airplanes, homes, ships and more

    Safety Notes:

    • Do not interchange with other manufacturer's fittings.
    • Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.
    • Do not use a wrench or vice on ferrule.
    • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
    • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.
    • Consult Dixon® for recommendations on usage.
    • Strict adherence to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance.
    • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.
    • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
    • Media being transported through the hose should be compatible with the stem material.
    • Compatibility of ferrule material with the environment in which it will be used is recommended.
    • Consult the Compatibility Chart or the Dixon® factory for material compatibility.
    • Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_1020304C_CAT.pdf
    • Cut Sheet https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_R15AAASA_SS.pdf
    • Technical Drawing/Parts Diagram https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_R15BS-A_TD.pdf

    Complete Your Assembly