3% Off All Online Orders Over $100
ARG Industrial 1900-00855

ARG Industrial

ARG Industrial 1900-00855 UHMWPE Dyneema Winch Line, 3/8 in, 80 ft L, 12 Strand, with Stainless Steel Thimble and 3 ft Protective Sleeve

  • Manufacturer: ARG Approved Manufacturer
  • Brand: ARG Industrial
  • ARGPN: 1900-00855
  • ARG Industrial Available for Pickup - Anchorage, AK Branch: loading Click here
  • ARG Industrial Available for Shipping: loading
  • Available for ARG Approved Manufacturer factory-direct delivery: loading
  • loading
  • Add to cart
    Add To Favorites
pin-int

Lighter than steel, and it does not whip when it lets go.

ARG Industrial Dyneema Winch Line, Size: 3/8 in, Length: 80 ft, Material Construction: UHMWPE, 12 Strand, Includes: Stainless Steel Thimble and 3 ft Protective Sleeve A 3/8 in 12-strand UHMWPE (Dyneema) line, 80 ft, finished with a stainless thimble at the working end and a 3 ft protective sleeve where the line runs onto the drum and past the fairlead. Synthetic winch line is specified over steel for three reasons: it weighs a fraction as much, it stores far less energy under load so a parted line does not whip the way steel does, and it never develops the barbs that shred hands and gloves.

For Use With      :      Winches, Recovery and Pulling
Length      :      80 ft
Material      :      UHMWPE
Material Construction      :      UHMWPE
Number of Strands      :      12
Product Type      :      Rope
Size      :      3/8 in
12-strand single-braid UHMWPE (Dyneema) construction; stainless steel thimble termination; requires a hawse fairlead, not a roller; degraded by UV, abrasion and chemical exposure; retire on fraying, two adjacent cut strands or approximately 25 percent strand-volume loss; not for overhead lifting