3% Off All Online Orders Over $100
Dixon® RM6 RM6

Dixon® 316 Stainless Steel Short Shank Hose Mender

Dixon® RM6 316 Stainless Steel Short Shank Hose Mender, 3/4 in Hose Barb

pin-int

Dixon® Short Shank Hose Mender, Connection Type 1: Hose Barb, Connection Size 1: 3/4 in, Connection Type 2: Hose Barb, Connection Size 2: 3/4 in, Material Construction: 316 Stainless Steel, 2-1/2 in Length

California residents see Prop 65 WARNINGS

Connection Size 1      :      3/4 in
Connection Size 2      :      3/4 in
Connection Type 1      :      Hose Barb
Connection Type 2      :      Hose Barb
Length      :      2-1/2 in
Material      :      Stainless Steel
Material Construction      :      316 Stainless Steel
Shape      :      Hose Mender
Safety Notes: Menders are not for compressible products such as air, nitrogen or steam. The working pressure may vary with the construction of the hose, the type of clamping system used and the application. Consult Dixon® for recommendations. In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement.For additional information and detailed instructions on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
  • Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_H5076BU_CAT.pdf
  • Cut Sheet https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_RM2_SS.pdf
  • SDS https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_RM2_SDS.pdf
  • Technical Drawing/Parts Diagram https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_RM2_TD.pdf

Complete Your Assembly