3% Off All Online Orders Over $100
Dixon® GDB28 GDB28

Dixon® Boss™ Plated Iron Ground Joint Double Spud

Dixon® Boss™ Ground Joint Double Spud, NPSM X NPSM, Iron

  • Add to cart
    Add To Favorites
    • pin-int

    Dixon® Boss™ Ground Joint Double Spud, Connection Type 1: NPSM, Gender 1: Male, Connection Size 1: 2 in, Thread Size 1: 2-1/2-8, Connection Type 2: NPSM, Gender 2: Male, Connection Size 2: 2 in, Thread Size 2: 2-1/2-8, Hex Size: 3 in, Material Construction: Iron, Finish: Plated, For Use With: Boss™ Ground Joint Fittings

    California residents see Prop 65 WARNINGS

    Connection Size 1      :      2 in
    Connection Size 2      :      2 in
    Connection Type 1      :      NPSM
    Connection Type 2      :      NPSM
    Finish      :      Plated
    For Use With      :      Boss™ Ground Joint Fittings
    Gender 1      :      Male
    Gender 2      :      Male
    Hex Size      :      3 in
    Material      :      Malleable Iron
    Material Construction      :      Iron
    Shape      :      Ground Joint Spud
    Sub Brand      :      Boss™
    Thread Size 1      :      2-1/2-8
    Thread Size 2      :      2-1/2-8
    • The spud part of the coupling serves as one half of the Boss ground joint connection and is usually fixed to the equipment
    • The stem part that is clamped to the hose is the other half, the two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical, and a pressure seal
    • Positive metal-to-polymer seal
    • The non-metallic polymer seat resists most chemicals found in manufacturing facilities
    • Easy-to-seal
    • Polymer seat
    • Recommended for steam service up to 450 deg F

    Safety Notes: Worn-out hose couplings can be dangerous.

  • They should be checked regularly and replace when necessary.
  • Each coupling user should review applications and add safety devices where indicated.
  • Pressurized steam is an extremely dangerous commodity.
  • Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used!
  • Never use an unapproved item for steam service.
  • Always follow the manufacturer's product recommendations for pressurized steam handling.

    Applications: For air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in ID

    • Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_GB13_CAT.pdf
    • Cut Sheet https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_GDB23_SS.pdf
    • Technical Drawing/Parts Diagram https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_GDB28_TD.pdf

    Complete Your Assembly