3% Off All Online Orders Over $100
Dixon® 4NS6 4NS6

Dixon® Dix-Lock™ N Series Trivalent Chrome-Plated Steel Pneumatic Interchange Coupler

Dixon® Dix-Lock™ N Series Pneumatic Interchange Coupler, Quick Disconnect X Hose Barb, Trivalent Chrome-Plated, Steel, 500 psi

  • ARGPN: 4NS6 loading
pin-int

Dixon® Dix-Lock™ Pneumatic Interchange Coupler, Series: N, Connection Type 1: Quick Disconnect, Gender 1: Female, Connection Size 1: 1/2 in, Connection Type 2: Hose Barb, Connection Size 2: 3/4 in, 500 psi, Material Construction: Steel, Finish: Trivalent Chrome-Plated, Dimensions: 3.37 in L, -40 to 250 deg F

California residents see Prop 65 WARNINGS

Connection Size 1      :      1/2 in
Connection Size 2      :      3/4 in
Connection Type 1      :      Quick Disconnect
Connection Type 2      :      Hose Barb
Dimensions      :      3.37 in L
Finish      :      Trivalent Chrome-Plated
Gender 1      :      Female
Material      :      Steel
Material Construction      :      Steel
Pressure Rating      :      500 psi
Series      :      N
Shape      :      Coupler
Sub Brand      :      Dix-Lock™
Temperature Rating      :      -40 to 250 deg F
Machined components are manufactured using solid bar stockNitrile (Buna-N) seals are standardSteel componentry is plated using RoHS compliant trivalent chromeBowes interchange bayonet styleInterchangeable with Bowes 51000 Series, National Series 'B', MacDonald quick action, Campbell single-lockLow profile prevents hose snagsSafety Notes: Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and hose end connection combination.Consult hose manufacturer's catalog for hose end connection ratings.If in doubt, test under controlled conditions for suitability to application.Dixon® cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and personal injury including death.It is important to be safe when installing quick disconnect couplings into a pneumatic circuit.Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18 in long, between the tool and the coupling, to prevent damage to the coupling.To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_4NS3_CAT.pdf

Complete Your Assembly