3% Off All Online Orders Over $100
GORE® 0015F 1/2 GORJX15

GORE® PTFE Joint Sealant

GORE® Joint Sealant, PTFE, 145 psi

  • Add to cart
    Add To Favorites
    • pin-int

    GORE® Joint Sealant, 15 ft Length, 1/2 in Width, -452 to 600 deg F, 145 psi, Material Construction: PTFE

    Length      :      15 ft
    Material      :      PTFE
    Material Construction      :      PTFE
    Pressure Rating      :      145 psi
    Product Type      :      Joint Sealant
    Temperature Rating      :      -452 to 600 deg F
    Width      :      1/2 in

    GORE® joint sealant is versatile and easy-to-install, this 100% ePTFE sealing cord is a cost-effective solution for large steel flanges in general-use applications. It is a time-tested sealing solution for steel flanges with large diameters, rectangular or irregular shapes and rough or pitted surfaces. When compressed, this soft, conformable cord forms a thin yet strong seal. It can also seal applications where available bolt loads are low. Versatile GORE® joint sealant is standard sealing material for many MRO (Maintenance, Repair and Operations) teams because it seals reliably and because it's easy and cost-effective to install. For most applications, just peel off the adhesive backing, apply to the surface and overlap the ends.

    All Gore sheet gasket products and unprinted GORE® Universal Pipe Gaskets are now certified to meet the requirements for repeat-use food contact applications with all food types per FDA regulations 21CFR174.5 (d) (1-5), 21CFR177.1550 (and 21 CFR175.300 for products with red and green printing ink) and conform to the requirements of regulation (EC) No 1935/2004 including (EU) No 10/2011.

    • Chemical resistance to all media pH 0-14, except molten alkali metals and elemental fluorine

    Applications: For large/non-standard steel equipment flanges, tank manways, ductwork, housing covers, chemical processing, pulp and paper, mining and minerals, semi-conductor manufacturing, power generation

    Complete Your Assembly