Upson-Walton™ 40037502

Swaged right, this is the only rope end that keeps 100 percent of the rope's strength.

Muncy™ Upson-Walton™ Open Swage Socket, Cable Size: 3/8 in, After Swage Diameter: 0.688 - 0.710 in, Material Construction: C-1035 Carbon Steel, Material: Steel, Length: 5-5/16 in, Width: 1-11/16 in, For Use With: 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC Wire Rope Forged from special C-1035 fine-grain, special-bar-quality steel and spheroidized annealed for cold swaging. Sized for 3/8 in wire rope, with an after-swage shank diameter of 0.688 - 0.710 in and an ultimate load of 8.3 tons. Properly applied swage sockets have an efficiency rating of 100 percent based on the catalog strength of the wire rope, and are approved for galvanized bridge rope as well as bright rope.

After Swage Diameter	:	0.688 - 0.710 in
Cable Size	:	3/8 in
For Use With	:	6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC Wire Rope
Length	:	5-5/16 in
Material	:	Steel
Material Construction	:	C-1035 Carbon Steel
Product Type	:	Swage Socket
Width	:	1-11/16 in

Forged C-1035 fine-grain special bar quality steel; spheroidized annealed for cold swaging; after-swage diameter 0.688 - 0.710 in; ultimate load 8.3 tons; 100 percent efficiency rating when properly applied; suits 6 x 19 and 6 x 37 IPS, XIP, XXIP, RRL, FC and IWRC rope; approved for galvanized bridge rope