3% Off All Online Orders Over $100
Dixon® DM26 DM26

Dixon® Zinc-Plated Steel Hose Mender

Dixon® Hose Mender, Hose Barb X Hose Barb, Zinc-Plated, Steel

  • Add to cart
    Add To Favorites
    • pin-int

    Dixon® Hose Mender, Connection Type 1: Hose Barb, Connection Size 1: 2 in, Connection Type 2: Hose Barb, Connection Size 2: 2 in, Material Construction: Steel, Finish: Zinc-Plated, 2 in Diameter, 4-7/8 in Length

    California residents see Prop 65 WARNINGS

    Connection Size 1      :      2 in
    Connection Size 2      :      2 in
    Connection Type 1      :      Hose Barb
    Connection Type 2      :      Hose Barb
    Diameter      :      2 in
    Finish      :      Zinc-Plated
    Industry Category      :      Combination Nipples & Menders
    Length      :      4-7/8 in
    Material      :      Steel
    Material Construction      :      Steel
    Shape      :      Hose Mender

    Safety Notes: Menders are not for compressible products such as air, nitrogen or steam.

  • The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
  • Consult Dixon® for recommendations.
  • In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for 15 min without leaking or coupling movement.
  • For additional information and detailed instructions on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
    • Catalog https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_USW_CAT.pdf
    • Cut sheet https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_DM100_SS.pdf
    • Technical Drawing/Parts Diagram https://www.teamarg.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_DM26_TD.pdf

    Complete Your Assembly